An air conditioner is used for cooling air in a room. The difference is that a refrigerator cools only a small, usually enclosed room, and an air conditioner controls the temperature of your entire home, business, or commercial area. Your air conditioner utilizes natural chemicals that convert from liquid to gas and back to liquid quickly and efficiently. You need to be aware of the basic functions and maintenance of an air conditioner in order to maintain it properly. This article provides some useful information on air conditioners to help you get the most out of your air conditioner and prevent it from experiencing issues.
ACs require electricity, so they must be plugged into an electric outlet. In some areas of the country, however, there is no electric grid available, so the air conditioners have to be plugged into a power source through a heat pump. Heat pumps pull power from your existing power source through a mechanism called an electric heat pump. These units are more expensive to purchase and run, but they are usually cheaper to run and have a longer lifespan than air conditioners that need to be constantly replaced.
Your air conditioner needs to be kept up to date to make sure that it is properly performing. There are two main parts to a cooling unit: the compressor fan. The compressor is where hot air is compressed before being released into the condenser coil. Compressors can either be oil-lubed or oil-less, depending upon your situation, but generally, oil-less compressors are better for extending the life of your unit and for preventing oil build-up and corrosion.
To keep your air conditioner running smoothly, it needs to be properly maintained. Regularly check and clean ductwork and heating and cooling system components. Remove lint, debris, dust, pollen, and any other items that could potentially clog your ductwork or heating and cooling system.
Clean your air conditioner on a monthly basis. Use a damp cloth or a vacuum to clean the exterior of your unit. Use warm water and mild soap to clean the interior of the ductwork. Examine your filters, gaskets, and blower frequently for leaks and cracks. Make sure that the blower has no leaks and that it does not overheat.
If you use an older model, it might be time to replace the entire air conditioner. Check the manufacturer’s specifications to see what refrigerant is required for your particular model and brand. Generally, all coolers require between fifteen and twenty-five percent refrigerants. If your new unit requires more, your manufacturer will be able to advise you. The amount of refrigerant in your system is determined by the heat output of the room and the humidity level. If your cooler is operating at a high heat output, it may not need as much refrigerant to run properly, so make sure to get information on the brand of your unit.